100孔冷凍保存盒
產品
點擊圖片放大商品名稱:
規格介紹:
100孔冷凍保存盒
CRYOSTORE™ STORAGE BOXES FOR 100 CRYOGENIC VIALS OF 1 TO 2 ML SIZES
SP-T314-2100B/G/R/Y
規格介紹:100孔冷凍保存盒
CRYOSTORE™ STORAGE BOXES FOR 100 CRYOGENIC VIALS OF 1 TO 2 ML SIZES
SP-T314-2100B/G/R/Y
- Holds 100 cryogenic internal threaded vials of 1 to 2 ml sizes
- Made of polycarbonate, resistant to temperatures between -196 °C and 121 °C
- Transparent cover with printed numerical grid from 1 to 100
- Vial picker included with every box
- Comes in four different colored bases (blue, green, red and yellow)
- Stackable with drain holes on the base and vent holes on the lids
詳細介紹:
Holds 100 cryogenic internal threaded vials of 1 to 2 ml sizes.
A transparent cover allows the user to see the contents of the box and is keyed to the base to prevent misalignment. Printed with a numerical grid, the surface accepts writing with markers, facilitating inventory control.
Four colors available. Removal of vials facilitated by a vial picker supplied with each storage box. Size fits most freezer metal racks.
Made of extra-strong polycarbonate, these durable cryogenic storage boxes are designed to be used at temperatures between -196 °C and +121°C and are autoclavable.
For cryovial tubes:
| Cat. No. | Description | Style | Volume | Qty/Pk | Qty/Cs |
| T301-1 | Internal thread with silicone o-ring seal | Self-standing | 1.2 ml | 100 | 1000 |
| T301-2 | Self-standing | 2 ml | 100 | 1000 | |
| T301-3 | Round bottom | 2 ml | 100 | 1000 | |
| T311-1 | Internal thread with silicone washer seal | Self-standing | 1.2 ml | 100 | 1000 |
| T311-2 | Self-standing | 2 ml | 100 | 1000 | |
| T311-3 | Round bottom | 2 ml | 100 | 1000 |
| Material | Polycarbonate |
| Cap color | Transparent |
| Length mm (in) | 133 (5 1/4") |
| Width mm (in) | 133 (5 1/4") |
| Height mm (in) | 52 (2 1/16") |
| Temperature range | -196 °C to +121 °C |
| Wells | 100 |
| Autoclavable | Yes |
| Qty/Pk | 4 |
| Qty/Cs | 24 |
更多商品
鋁製冷凍瓶夾(1.2/2ml 29cm) CANE FOR CRYOVIAL® TUBES SP-T313
無菌冷凍管 CRYOVIAL® EXTERNAL THREAD WITH SILICONE WASHER SEAL SP-T310-2/5A/10A
Designed for safe storage at temperatures as low as -196 °C (but should be used only in the gas phase of liquid nitrogen). Autoclavable at 121°C. Sterilized by gamma radiation and packaged in unique tamperproof, resealable, safety-lock bags of 100†. Skirted tubes have a locking base for easy one-hand operations and only 1 1/4 turn of the cap is sufficient to screw the cap on the vial. Closure* and vial are both made of polypropylene having the same coefficient of expansion, ensuring an equally secure seal both at room temperature and at low cryogenic temperatures. Tubes have a white marking area, they can be color-coded with a Capinsert™ (Series T312) and are compatible with most storage systems. Only the non-skirted vials can be centrifuged up to 17,000 x g. *T310-10A exceptionally has a Polyethylene cap* †T310-10A is sold in packs of 50; case of 500. All other tubes are sold in packs of 100; case of 1000
新型試管架(50ml 18孔 藍/黃/綠/橘/粉) SP-S600-30B/Y/G/O/L
A newly designed tube support that can be used all around the lab. The MultiRack™ is available in 3 models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available today, it offers all the advantages required by the modern laboratory. Made of highly resistant acetal, it will not shatter or stain in contact with most laboratory chemicals. No coating to worry about, which can chip, peel or rust in a water bath. The MultiRack™ is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over. The MultiRack™ is made of three-tiers to facilitate the insertion and stability of tubes. The base tier has rounded wells with drain holes. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm. Series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Series S600-30 is perfect for accommodating up to 18 x 50 ml centrifuge tubes. Available in five attractive colors Dimensions: 293 x 115 x 65 mm H (11 1/2 x 4 1/2 x 2 1/2 in. H) Material Acetal Qty/Pk 1 Qty/Cs 10
多彩微量管架(80孔 1.5ml) SP-S500-80AS
On one side, the Unirack™ can hold up to 80 polystyrene or polypropylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml as well as 1 to 5 ml cryogenic vials. Flip the UniRack™ over and you can store up to 60 PCR or microcentrifuge tubes from 0.2 to 0.5 ml. Units can be firmly anchored laterally to one another, thanks to special anchor pins supplied with each rack. This innovative concept will allow the user to store 80, 160, 240 and 320 tubes of different shapes, sizes and volumes since the units can be attached to each other either on the 80- or 60- position side facing upward, thus ensuring maximum versatility. It is supplied with two removable handles allowing for better safety characteristics. The handles of the lower rack make a perfect fit with those of the upper one, ensuring a stable unit which can easily and safely be moved around. An additional protection level is possible by using a very resistant and quite affordable transparent lid allowing a clear view of the contents. There is a frosted area on both sides for bar coding, labeling or writing, enabling the user to identify the contents. It is easy to write on it with a felt-tip pen. Offered in a wide array of colors. *Assorted colors: blue, green, orange, pink and yellow. Dimensions: 223 x 67 x 27 mm H (9-3/16 x 2-5/8 x 1-1/16 H) Plastic Polypropylene
微量管架(25孔) SP-S500-25B/R/Y
This smaller model of the UniRackTM can hold up to 25 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml made by manufacturers such as Simport®, Sarstedt, Nalgene, Bio-Plas, SSI, Sorenson etc... as well as 1 to 5 ml cryogenic vials. Flip the UniRackTM over and you can store up to 16 PCR or microcentrifuge tubes from 0.2 to 0.5 ml. Supplied without handles or anchor pins. Plastic Polypropylene Qty/Cs 10
塑膠吸管 SP-P200-60
These all-in-one pipets eliminate the hazard of broken glass and exposure to infectious materials. Put an end to matching rubber bulbs with glass pipets. Molded from see-through low-density polyethylene. Inert to biological fluids and most acids. The low-affinity surface reduces the loss of cells and valuable proteins due to binding. Can be sealed and refrigerated. They work well whenever there is a need for quick, safe transfer of fluids. Temperature resistant down to -196°C. Can be gas (EtO) sterilized. Packaging: All non-sterile pipets are in boxes of 500 and cases of 5000. Exception: P200-82 are in boxes of 400 and cases of 4000. Most sterile pipets are in boxes of 400 and cases of 4000. Choose between 12 very popular models, available in several sizes, tip designs and lengths, in sterile or non-sterile packaging. Seven models provide graduations. * Available on request only. Minimum quantities apply. Please enquire for more details. Cat. No. Sterile Graduated Length Stem Ø Capacity Bulb draw Inner pack P200-10 6.3 cm 2.5 mm 1.2 ml 0.9 ml Loose P200-1020S* ✔ 6.3 cm 2.5 mm 1.2 ml 0.9 ml 20 P200-14 ✔ 11.4 cm 3 mm 1.5 ml 0.9 ml Loose P200-1420S* ✔ ✔ 11.4 cm 3 mm 1.5 ml 0.9 ml 20 P200-20 8.7 cm 4.7 mm 1.7 ml 0.8 ml Loose P200-2020S* ✔ 8.7 cm 4.7 mm 1.7 ml 0.8 ml 20 P200-30 ✔ 13.8 cm 5 mm 3 ml 2.1 ml Loose P200-301S* ✔ ✔ 13.8 cm 5 mm 3 ml 0.8 ml 1 P200-3020S* ✔ ✔ 13.8 cm 5 mm 3 ml 0.8 ml 20 P200-44 15.5 cm 2.5 mm 4 ml 3.1 ml Loose P200-4410S* ✔ 15.5 cm 2.5 mm 4 ml 3.1 ml 10 P200-4420S* ✔ 15.5 cm 2.5 mm 4 ml 3.1 ml 20 P200-52 ✔ 15 cm 5 mm 5 ml 3.1 ml Loose P200-521S* ✔ ✔ 15 cm 5 mm 5 ml 3.1 ml 1 P200-5210S* ✔ ✔ 15 cm 5 mm 5 ml 3.1 ml 10 P200-5220S* ✔ ✔ 15 cm 5 mm 5 ml 3.1 ml 20 P200-56 ✔ 15.5 cm 6.7 mm 5 ml 1.9 ml Loose P200-5610S* ✔ ✔ 15.5 cm 6.7 mm 5 ml 1.9 ml 10 P200-5620S* ✔ ✔ 15.5 cm 6.7 mm 5 ml 1.9 ml 20 P200-58 ✔ 15.6 cm 6.7 mm 5 ml 1.8 ml Loose P200-5820S* ✔ ✔ 15.6 cm 6.7 mm 5 ml 1.8 ml 20 P200-58V ✔ 14.5 cm 6.7 mm 5 ml 1.8 ml Loose P200-58V20S* ✔ ✔ 14.5 cm 6.7 mm 5 ml 1.8 ml 20 P200-60 22.5 cm 5 mm 6 ml 2.3 ml Loose P200-6010S* ✔ 22.5 cm 5 mm 6 ml 2.3 ml 10 P200-6020S* ✔ 22.5 cm 5 mm 6 ml 2.3 ml 20 P200-72 ✔ 15.5 cm 7.8 mm 7 ml 3.2 ml Loose P200-721S* ✔ ✔ 15.5 cm 7.8 mm 7 ml 3.2 ml 1 P200-7210S* ✔ ✔ 15.5 cm 7.8 mm 7 ml 3.2 ml 10 P200-7220S* ✔ ✔ 15.5 cm 7.8 mm 7 ml 3.2 ml 20 P200-82 15 cm 6.3 mm 8 ml 4.6 ml Loose P200-8220S* ✔ 15.5 cm 6.3 mm 8 ml 4.6 ml 20
無菌細胞推展棒 SP-L300
No flame sterilization needed. Designed for easy spreading of cells onto the surface of an agar plate. Supplied sterile in individual packs. Total length of handle: 176 mmWidth of spreader: 36 mm Material High Impact Polystyrene (HIPS) Length (mm) 176 Sterilization Gamma radiation Color Green Qty/Pk 1 Qty/Cs 100
無菌塑膠接種環 SP-L200-1A~3A
Loops and needles are smooth and flexible to facilitate uniform streaking without damaging the gel surface. Needles are straight and suitable for removal of specimens of single colonies. Packed sterile in safe, tamperproof, zip-lock resealable bags. Cross contamination due to improper sterilization is eliminated. Disposable inoculating loops and needles do not require flaming and thus eliminate the risk of infection due to aerosol formation of pathogenic substances. They can be used under hoods without danger, and are color-coded for ease of size identification. Certificate of conformity available upon request. Total length: 227 mm Pk/1 sold in cases of 25 Pk/10 and pk/25 sold in cases of 1000
